Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Brookline?
New garage door installation in Brookline typically costs $700 to $2,200 for a standard single door, including the door and hardware; a larger double door with a new opener sits at the top of that range. Most jobs are quoted after a quick look at your opening, headroom and current hardware, and the written estimate sets the final price. Call (888) 478-5598 for a free estimate and a same-day quote on most jobs.
We’re a garage door specialty company, not a general handyman outfit. That matters here: Brookline’s older housing stock has garages that were framed decades ago for wooden swing and early sectional doors, and installing a modern insulated door into that kind of opening takes measuring the headroom, checking the jamb, and knowing how the door will travel before a single panel goes up. Our technicians have up to 12 years of experience with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor systems, so we’re not learning your brand on the job. From a single spring to a full installation, we handle diagnosis, parts and the install without handing the job off.
Key Takeaways
- Typical new door installation in Brookline: $700 to $2,200 for a single door, rising with size, insulation and opener additions.
- Opener installation on its own runs $250 to $550; opener repair is $120 to $320.
- If a door can be repaired for $150 to $600, repair usually costs less than replacing it.
- We’re familiar with eight major brands and source parts and labor together, so you don’t hire a second company.
- Free estimates, upfront pricing, and a written quote before any work starts. Call (888) 478-5598.
Garage Door Installation Cost Breakdown (2026)
Here’s how installation pricing breaks down in the Brookline market. The ranges below are typical estimates; the written estimate sets the final price for your specific door, opening and hardware.
| Item | Typical Estimated Range |
|---|---|
| New door installation (single door, door and hardware) | $700 – $2,200 |
| Opener installation | $250 – $550 |
| Opener repair | $120 – $320 |
| Spring repair (one spring) | $180 – $340 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Cable repair | $130 – $250 |
| Roller replacement | $110 – $220 |
| General garage door repair | $150 – $600 |
A matched pair of springs is usually replaced together, so a spring pair costs about twice the single-spring range above. We mention that now because a new door install often comes with a fresh spring set, and it’s the item homeowners most often forget to budget for.
What pushes a new door install toward the high end? Size and material first. A single 8- or 9-foot door in steel sits near the bottom. A double door, a carriage-house style, or a wood-look composite lands near the top. Insulation adds cost but changes how the garage feels in the summer and winter, which matters in Brookline’s climate swings. A new opener and smart-home controls add a set amount, and any repair needed to the opening first, like track realignment or a panel issue, gets quoted alongside. If you already have an opener you like, we can install the door and leave the opener in place.
What Affects Garage Door Installation Pricing in Brookline
Two homes on the same street in Brookline can price differently for the same door. Here are the factors that move the number.
- Door size and material. Single vs. double, steel vs. composite, insulated vs. uninsulated. These are the biggest swing factors in the $700 – $2,200 range.
- The opening itself. Brookline has plenty of homes with garages added or modified after the fact. If the framing, jamb or headroom isn’t square to a modern door, that gets handled before install, and it’s included in the written estimate.
- Existing hardware condition. Tracks, rollers and springs that are worn get flagged during install. We quote spring repair ($180 – $340), track realignment ($120 – $240) and roller replacement ($110 – $220) as separate line items so you can see exactly what’s being done.
- Opener type and compatibility. A new Wi-Fi-enabled LiftMaster or Chamberlain opener wiring into an older garage panel is a different job than swapping a legacy Craftsman unit. We work with both smart and mechanical openers, so this gets priced accurately up front.
- Brand and parts availability. We source Clopay, Amarr, Wayne Dalton, Raynor and other brand parts directly, which keeps the quote predictable and avoids a second trip for a fitting or bracket.
- Climate and seasonal wear. Brookline winters are hard on seals, rollers and springs. If the install reveals weather-stripping or a threshold seal that’s shot, replacing it during the install is cheaper than a separate visit.
How to Save on Garage Door Installation
You don’t need to chase the cheapest quote to save money. A few practical moves bring the total down without cutting corners.
- Get the estimate in writing before work starts. We do this as standard. It prevents add-on line items and lets you compare apples to apples between quotes. Free estimates, call (888) 478-5598.
- Fix a repairable door instead of replacing it. If the door itself is sound and the problem is a panel, spring or track, repair at $150 – $600 usually beats replacement. We’ll tell you straight if repair is the smarter call.
- Keep your existing opener if it’s healthy. Adding an opener install ($250 – $550) only makes sense when the old one is failing. If your opener is a current LiftMaster or Genie model that’s working, install the door around it.
- Bundle wear items into the install. Rollers, cables and seals replaced during installation avoid a second service visit later.
- Consider a stock size and standard finish. Custom sizes and premium finishes cost more. Standard single doors land closer to the $700 end of the range.
If you want to understand the full scope of what a new install covers, our garage door installation page walks through the process, what we measure and how we handle brand-specific hardware. And for anyone troubleshooting on their own, we supply parts separately so you’re not stuck buying a full service call just to get a roller or bracket. For the broader repair side of the business, see Brookline Garage Door Repair Pros.
FAQs – Garage Door Installation Cost
How much does a new garage door cost installed in Brookline?
New garage door installation in Brookline typically runs $700 to $2,200, including the door and hardware. Single steel doors sit near the low end; double, insulated or carriage-style doors near the top. The written estimate sets the final price. Call (888) 478-5598 for a free quote on your specific opening.
Is it cheaper to repair or replace a garage door in Brookline?
Repair is usually cheaper. General garage door repair in Brookline runs $150 to $600, well below the $700+ starting point for a full replacement. Replacement only makes sense when the door’s structure is compromised or multiple major components fail at once. Call (888) 478-5598 and we’ll give you an honest read on which way to go.
How much does a garage door opener cost to install in Brookline?
Opener installation in Brookline typically costs $250 to $550, depending on the opener model and how much wiring or existing hardware needs updating. If your current opener just needs repair, that’s $120 to $320. Call (888) 478-5598 for a free estimate.
Can you install a new door if my old spring or track is broken?
Yes, and it’s a good time to fix it. Spring repair runs $180 – $340 per spring, and track realignment is $120 – $240. Doing this during installation avoids a separate service call. Springs and cables are dangerous to handle without proper tools and training; leave that work to a pro. Call (888) 478-5598 to bundle it into your install quote.
Do you install openers on brand-new doors, or is that a separate job?
Opener installation is included in the same job when you order it. Typical total for a new single door plus a new opener in Brookline lands between $950 and $2,200, depending on the door and opener you choose. We work with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. Call (888) 478-5598 for a free written estimate.
Get a Free Installation Estimate in Brookline
Whether you’re replacing a worn wooden door with an insulated Clopay, swapping a legacy opener for a Wi-Fi-enabled LiftMaster, or need a single door installed into an older Brookline garage, we’ll quote it in writing before any work begins. Same-day service is available on most jobs, and we offer fast dispatch from 7am to 7pm. Call (888) 478-5598 for a free estimate, and get it fixed right the first time.
Pricing reflects the Brookline market as of 2026. Brookline Garage Door Repair Pros offers free estimates – call (888) 478-5598.
Written by the team at Brookline Garage Door Repair Pros.
What Our Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Danika Prince"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Michael Thompson"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Darius Ingram